Insulation Material

• Color
• White

• Density
• 128 Kilogram per cubic meter (kg/m3)

• Material
• Ceramic Fiber

• Product Type
• Ceramic Fiber Insulation Blanket

• Thickness
• 40 Millimeter (mm)

• Application
• Sound Absorbers

• Coating Type
• None/Uncoated

• Color
• Black

• Density
• 96 Kilogram per cubic meter (kg/m3)

• Feature
• Flexible, waterproof, durable, wear-resistant

• Heat Conductivity
• Low (rubber is an insulating material)

• Installation Guideline
• Lay flat on required surface, can be cut to size, adhesive application optional

• Layer
• Single layer

• Material
• Rubber

• Max Withstanding Temperature
• -30C to +80C (varies by rubber compound)

• Product Type
• Rubber Strips Rolls

• Size
• Custom cut to requirement

• Surface Treatment
• Plain/Smooth

• Tensile Strength
• 5-20 MPa (varies by rubber type)

• Thermal Conductivity
• Approximately 0.13-0.21 W/mK

• Thickness
• 10 Millimeter (mm)

• Width
• 1500 Millimeter (mm)

• Application
• Insulation

• Color
• White

• Material
• Cerawool

• Product Type
• Cerawool Insulation Blanket

• Thickness
• 10 Millimeter (mm)

• Application
• Insulation

• Coating Type
• Optional aluminum foil or glass tissue facing

• Color
• Yellowish/Grey

• Density
• 150 Gram per cubic centimeter(g/cm3)

• Feature
• Fire Resistant, Sound Absorbing, Moisture Resistant, Eco-Friendly

• Heat Conductivity
• 0.035 - 0.045 W/mK

• Installation Guideline
• Install using mechanical fasteners or adhesives; ensure tight joints for thermal continuity

• Layer
• Single or Multi-layer (as per requirement)

• Material
• Rockwool

• Max Withstanding Temperature
• Up to 750C

• Product Type
• 120mm Insulated Rock Wool

• Size
• 1200 mm x 600 mm (common slab size)

• Surface Treatment
• Unfaced/Plain or with Aluminum Foil Facing (optional)

• Tensile Strength
• 7 kPa (can vary by manufacturer)

• Thermal Conductivity
• 0.035 - 0.045 W/mK

• Thickness
• 120 mm Millimeter (mm)

• Width
• 600 mm (typical)

• Application
• Industrial

• Coating Type
• No coating (can be provided with foil or mesh on request)

• Color
• Yellow

• Density
• 100 Gram per cubic centimeter(g/cm3)

• Feature
• Fire resistant, sound proof, eco-friendly, water repellent, non-corrosive

• Heat Conductivity
• 0.035-0.045 W/mK

• Installation Guideline
• Install within cavities or on surfaces using mechanical fixings or adhesives; ensure tight fit to avoid sound leakage

• Layer
• Single or multilayer, as required

• Material
• Rock Wool

• Max Withstanding Temperature
• Up to 750C

• Product Type
• Acoustic Insulated Rock Wool

• Size
• Standard slab or custom sizes

• Surface Treatment
• Uncoated/Plain

• Tensile Strength
• > 3 kPa

• Thermal Conductivity
• 0.035-0.045 W/mK

• Thickness
• 25 mm to 100 mm (variable as per requirement)

• Width
• 1200 mm Millimeter (mm)

• Application
• Walls & Partitions

• Color
• Silver

• Density
• 20 Kilogram per cubic meter (kg/m3)

• Material
• Aluminum

• Product Type
• Aluminium Insulated Rock Wool

• Surface Treatment
• Color Coated

• Thickness
• 120 mm Millimeter (mm)

• Application
• Insulation

• Coating Type
• Aluminum foil (optional for vapor barrier)

• Color
• Yellow

• Density
• 48 Gram per cubic centimeter(g/cm3)

• Feature
• Lightweight, fire resistant, sound absorption, flexible

• Heat Conductivity
• 0.035-0.045 W/mK

• Installation Guideline
• Can be cut and fitted as required; lay on flat, clean surfaces; secure with mechanical fasteners or adhesives as needed

• Layer
• Single or multi-layer, as per application

• Material
• Fiberglass

• Max Withstanding Temperature
• Up to 250C

• Product Type
• Fiberglass Wool Insulation Roll

• Size
• Custom lengths available, usually 10-20 meters per roll

• Surface Treatment
• Aluminum foil faced (optional)

• Tensile Strength
• ~15 kPa (typical)

• Thermal Conductivity
• 0.035-0.045 W/mK

• Thickness
• 10 Millimeter (mm)

• Width
• 1.2 m (standard)

• Application
• Insulation

• Coating Type
• Aluminium foil (optional) / Unfaced

• Color
• Yellow

• Density
• 48 Gram per cubic centimeter(g/cm3)

• Feature
• Lightweight, easy heat resistance, non-combustible, water repellent

• Heat Conductivity
• Low, highly efficient thermal insulation

• Installation Guideline
• Cut to size, place or pin to surface, seal joints with foil tape

• Layer
• Single or multi-layer

• Material
• Fiberglass

• Max Withstanding Temperature
• Up to 250C

• Product Type
• Bonded Fiberglass Wool Roll

• Size
• Custom lengths available per roll

• Surface Treatment
• Aluminium foil facing (optional)

• Tensile Strength
• Good (varies with density and thickness)

• Thermal Conductivity
• 0.035 - 0.045 W/mK

• Thickness
• 100 mm Millimeter (mm)

• Width
• 1200 mm (customizable)

• Application
• Valves, flanges, exhausts, turbines, pipe bends, pumps, heat exchangers, equipment with irregular shapes

• Breakdown Voltage
• N/A (Non-electrical insulation)

• Coating Type
• Silicone, PTFE, or Aluminized (optional as per requirement)

• Color
• Grey

• Density
• 120 Gram per cubic centimeter(g/cm3)

• Feature
• Reusable, flexible, easy to install and remove, custom made, weather & oil resistant, energy saving

• Heat Conductivity
• Less than 0.035 W/mK at 20C

• Installation Guideline
• Wrap, secure with Velcro/straps/drawstrings; ensure complete coverage for maximum efficiency

• Layer
• Multiple layers: outer weather layer, insulation core, protective inner liner

• Material
• Fiberglass and Aerogel

• Max Withstanding Temperature
• Up to 650C (standard); higher rating available on request

• Product Type
• Removable Insulation Blanket

• Rated Voltage
• N/A (Mechanical insulation product)

• Size
• Custom-fit as per application/equipment dimension

• Surface Treatment
• Silicone or PTFE (optional for moisture resistance)

• Tensile Strength
• High, as per base fabric; typically >1000 N/5cm

• Thermal Conductivity
• 0.035 W/mK

• Thickness
• 20 mm Millimeter (mm)

• Width
• Customizable as per equipment requirement

• Application
• Insulation

• Coating Type
• Optional aluminum foil or glass cloth facing

• Color
• Yellow

• Density
• 150 Gram per cubic centimeter(g/cm3)

• Feature
• Non-combustible, water repellent, sound absorbing, dimensionally stable, environmentally friendly, high fire resistance

• Heat Conductivity
• 0.033-0.045 W/mK

• Installation Guideline
• Panels to be cut and fitted as per wall/roof dimensions; can be placed between studs/joists or fixed using fasteners. Follow manufacturers instruction for optimum insulation.

• Layer
• Single or with laminate facing

• Material
• Rockwool

• Max Withstanding Temperature
• 750C continuous, short-term up to 1000C

• Product Type
• Insulated Rockwool Panel

• Size
• L x 600 mm (Width) x Thickness (mm); Length customizable

• Surface Treatment
• Uncoated/plain, can be laminated with foil or other facings upon request

• Tensile Strength
• 7 kPa

• Thermal Conductivity
• 0.033-0.045 W/mK

• Thickness
• 120 mm Millimeter (mm)

• Width
• 600 mm (standard), customizable

• Application
• Noise Barriers

• Density
• 100 to 150 Kilogram per cubic meter (kg/m3)

• Feature
• High Quality

• Features
• Durable

• Material
• Fiberglass

• Max Withstanding Temperature
• 750 degree C

• Product Type
• Acoustic Insulation Mattress

• Thickness
• 2 Millimeter (mm)

• Usage & Applications
• widely used for Thermal Insulation of Ducts, Large Vessels, Cavity Wall, Curtain Wall Sandwich Panels.

• Width
• 200 Millimeter (mm)

• Application
• Thermal and acoustic insulation for industrial equipment, ducts, boilers, and pipelines

• Coating Type
• Wire mesh (if applicable)

• Color
• Yellow

• Density
• 120 Gram per cubic centimeter(g/cm3)

• Feature
• Fire resistant, sound absorption, water repellent, lightweight

• Heat Conductivity
• Low (Exact value typically 0.035 to 0.045 W/mK)

• Installation Guideline
• Wrap around pipes/equipment or layout over surfaces, secure with wire/mesh if required

• Layer
• Multiple layers possible based on thickness requirement

• Material
• Fiberglass

• Max Withstanding Temperature
• 750C to 850C

• Product Type
• Rockwool Insulation Mattress

• Size
• Customizable

• Surface Treatment
• Plain or wire mesh (galvanized or stainless steel) faced

• Tensile Strength
• High (varies by product grade)

• Thermal Conductivity
• 0.035 to 0.045 W/mK

• Thickness
• 30mm Millimeter (mm)

• Width
• 1220MM

• Application
• Barriers

• Breakdown Voltage
• Typically 6 kV/mm

• Coating Type
• Silicone Rubber Coated

• Color
• Black

• Density
• 1.5 Gram per cubic centimeter(g/cm3)

• Feature
• Flame Retardant, Waterproof, Flexible, High Strength, UV Resistant, Chemical Resistant

• Heat Conductivity
• Low / Insulating

• Installation Guideline
• Cut to size and apply as per application. Secure with high-temp tape or mechanical fasteners.

• Layer
• Single/Double Silicone Layered

• Material
• Silicon

• Max Withstanding Temperature
• -70C to +260C continuous, up to 300C short term

• Product Type
• Silicone Coated Fiberglass Cloth

• Size
• Custom Roll Lengths (usually 50 m per roll)

• Surface Treatment
• Smooth Silicone Coating on one/two sides

• Tensile Strength
• 350 N/25mm (varies by grade)

• Thermal Conductivity
• Low (~0.35 W/mK)

• Thickness
• 10 mm Millimeter (mm)

• Width
• 1000 mm - 1500 mm (Customizable)

• Application
• Steam Turbine

• Color
• Grey

• Density
• 0-200 Kilogram per cubic meter (kg/m3)

• Feature
• Energy Saving, Heat Resistance and Safety

• Layer
• Multiple Layers

• Material
• Heat Resistance Fabrics and Insulation

• Max Withstanding Temperature
• 1250

• Operating Temperature
• 300-1250 Celsius (oC)

• Product Type
• Insulation Jackets

• Size
• Customisable

• Thickness
• 10-300 Millimeter (mm)

• Usage & Applications
• Energy Saving, Heat Resistance and Safety

• Application
• Insulation

• Coating Type
• None (Uncoated)

• Color
• Yellow

• Density
• 200 Gram per cubic centimeter(g/cm3)

• Feature
• Fire Resistant, Water Repellent, Soundproof, Non-combustible, Eco-friendly

• Heat Conductivity
• 0.035 - 0.045 W/mK

• Installation Guideline
• Dry fit between studs or framing; no special adhesives needed; cut to size with knife or saw

• Layer
• Single or Multilayer as required

• Material
• Rockwool

• Max Withstanding Temperature
• ~800C

• Product Type
• 200mm Insulated Rock Wool

• Size
• 200 mm (thickness) x 600 mm (width) x custom length

• Surface Treatment
• Plain / Unfaced

• Tensile Strength
• 60 kPa (varies by grade)

• Thermal Conductivity
• 0.035 - 0.045 W/mK

• Thickness
• 100MM

• Width
• 600 mm (standard)

• Application
• Insulation

• Density
• 160 Kilogram per cubic meter (kg/m3)

• Feature
• High Quality

• Features
• Durable

• Product Type
• Acoustic Insulation Slab

• Thickness
• 120 mm Millimeter (mm)

• Usage & Applications
• Insulation

• Application
• Insulation

• Feature
• Durable

• Features
• Durable and Water Resistance

• Material
• Fiberglass

• Product Type
• Insulation Fiberglass Roll

• Thickness
• 10 mm Millimeter (mm)

• Width
• 1200 mm Millimeter (mm)

• Application
• Insulation

• Coating Type
• None or foil faced

• Color
• Yellow

• Density
• 48 Gram per cubic centimeter(g/cm3)

• Feature
• Non-combustible, moisture resistant, lightweight, soundproof, easy to install

• Heat Conductivity
• 0.032 - 0.044 W/mK

• Installation Guideline
• Can be cut to size and laid between studs or over ceilings. Use safety gloves and mask.

• Layer
• Single

• Material
• Fiberglass

• Max Withstanding Temperature
• Up to 250C

• Product Type
• 100mm Insulation Glass Wool

• Size
• Roll (custom length available)

• Surface Treatment
• Plain or aluminum foil faced

• Tensile Strength
• Good tensile and compressive strength

• Thermal Conductivity
• 0.032 - 0.044 W/mK

• Thickness
• 100 Millimeter (mm)

• Width
• 600 mm or custom

• Application
• Thermal and Acoustic Insulation of Walls, Roofs, Partitions, Industrial Equipment, HVAC Ducts

• Coating Type
• Optional Facing (FSK, Aluminum Foil)

• Color
• Yellow

• Density
• 150 Gram per cubic centimeter(g/cm3)

• Feature
• Fire Resistant, Water Repellent, Non-combustible, Chemically Inert

• Heat Conductivity
• 0.035 - 0.045 W/mK

• Installation Guideline
• Fit tightly into space; seal joints as required; follow manufacturer instructions

• Layer
• Single or Multi-layer Installation Possible

• Material
• Resin Bonded Mineral Wool

• Max Withstanding Temperature
• Up to 750C

• Product Type
• Rectangular Resin Bonded Slab

• Size
• 1200 mm x 600 mm (Standard)

• Surface Treatment
• Unfaced or FSK/Aluminum Foil Faced (Optional)

• Tensile Strength
• 10 kPa

• Thermal Conductivity
• 0.035 - 0.045 W/mK

• Thickness
• 50 mm Millimeter (mm)

• Width
• 1500 mm Millimeter (mm)

• Application
• Insulation

• Coating Type
• None (custom facings optional)

• Color
• Brownish / Yellowish fiber texture

• Density
• 200 Kilogram per cubic meter (kg/m3)

• Feature
• Fire-resistant, water-repellent, sound absorbing, eco-friendly

• Heat Conductivity
• Low, typically 0.036 - 0.040 W/mK

• Installation Guideline
• Can be cut and fitted between studs, joists, or profiles; install as per manufacturers instructions

• Layer
• Single or multi-layer as required

• Material
• Rockwool

• Max Withstanding Temperature
• Up to 750C

• Product Type
• Rockwool Resin Bonded Slab

• Size
• Standard: 1000 mm x 500 mm / 1200 mm x 600 mm, other sizes on request

• Surface Treatment
• Unfaced / FSK / Glass Tissue / Aluminum Foil as options

• Tensile Strength
• High tensile strength for slab stability

• Thermal Conductivity
• 0.036 - 0.040 W/mK

• Thickness
• 100 mm Millimeter (mm)

• Width
• 600 mm, 1200 mm (custom sizes available)

• Application
• Noise Barriers

• Coating Type
• Uncoated (custom coating available on request)

• Color
• Black

• Density
• 1500 Kilogram per cubic meter (kg/m3)

• Feature
• Excellent sound absorption, Lightweight, Flame retardant, Non-toxic

• Heat Conductivity
• Low (ideal for thermal insulation)

• Installation Guideline
• Easily cut and installed using adhesive or mechanical fixtures

• Layer
• Single / Multi-layer (depending on application)

• Material
• Foam

• Max Withstanding Temperature
• Up to 110C

• Product Type
• Acoustic Insulation Foam

• Size
• 6X3 Feet

• Surface Treatment
• Textured / Plain Finish

• Tensile Strength
• >120 kPa

• Thermal Conductivity
• 0.032-0.040 W/mK

• Thickness
• 30 Millimeter (mm)

• Width
• 1 meter (standard)

• Application
• Thermal Insulation for HVAC, ducting, refrigeration, pipelines

• Coating Type
• Uncoated or optional with aluminum foil facing

• Color
• Black

• Density
• 70 Gram per cubic centimeter(g/cm3)

• Feature
• Closed cell, flexible, moisture-resistant, anti-condensation, fire retardant

• Heat Conductivity
• 0.034-0.038 W/mK

• Installation Guideline
• Clean and dry surface before application, cut to fit, use adhesive for secure fixing

• Layer
• Single Layer

• Material
• Nitrile

• Max Withstanding Temperature
• -40C to +105C

• Product Type
• Nitrile Foam Sheet

• Size
• Roll form (custom size available)

• Surface Treatment
• Smooth Surface

• Tensile Strength
• 0.20 MPa

• Thermal Conductivity
• 0.034-0.038 W/mK

• Thickness
• 20 mm Millimeter (mm)

• Width
• Standard (1 m)

• Application
• Cladding Walls

• Coating Type
• Single-sided aluminum foil

• Color
• Silver

• Density
• 2.6 Gram per cubic centimeter(g/cm3)

• Feature
• Fire-resistant, corrosion-resistant, reflective, lightweight, durable, mildew-proof

• Heat Conductivity
• Low, excellent heat insulation properties

• Installation Guideline
• Cut to size and fix mechanically or with adhesives

• Layer
• 2 (Aluminum foil + fiberglass fabric)

• Material
• Aluminium Foil

• Max Withstanding Temperature
• Up to 550C (fiberglass), 120C (aluminum foil)

• Product Type
• Thermal Insulation Aluminum Foil Coated Fiberglass Fabric

• Size
• Standard roll length 50 m, customizable

• Surface Treatment
• Aluminum foil laminated on one side

• Tensile Strength
• 450 N/25mm

• Thermal Conductivity
• 0.035 W/mK

• Thickness
• 0.18 mm - 1.2 mm

• Width
• 1000 mm - 1250 mm

• Application
• Insulation

• Color
• Grey

• Features
• excellent quality

• Material
• Insulation Fabrics

• Product Type
• Thermal Insulation Fabrics

• Thickness
• 6 Millimeter (mm)

• Usage & Applications
• Insulation

• Application
• Insulation

• Coating Type
• Optional facing with foil or tissue

• Color
• Yellow/Light Brown

• Density
• 150 Gram per cubic centimeter(g/cm3)

• Feature
• Non-combustible, water repellant, fire resistant, sound absorptive

• Heat Conductivity
• 0.035 - 0.040 W/mK

• Installation Guideline
• Install on clean, dry surface with mechanical fasteners or adhesives as required

• Layer
• Single or multi-layer, as per insulation requirement

• Material
• Resin bonded mineral wool

• Max Withstanding Temperature
• Up to 750C

• Product Type
• Resin Bonded Slab

• Size
• 1200 mm x 600 mm (standard), custom sizes available

• Surface Treatment
• Plain or faced with aluminum foil, glass tissue or black glass tissue

• Tensile Strength
• Good tensile strength as per IS/ASTM standards

• Thermal Conductivity
• 0.035 - 0.040 W/mK

• Thickness
• 100 Millimeter (mm)

• Width
• 1200 mm Millimeter (mm)

• Application
• Industrial

• Coating Type
• Silicone or PTFE coated (optional)

• Color
• Grey

• Density
• 150 Gram per cubic centimeter(g/cm3)

• Feature
• Reusable, flame retardant, heat resistant, easy to install & remove

• Heat Conductivity
• 0.035 W/mK at 800C

• Installation Guideline
• Wrap around the manifold/exhaust, secure with Velcro straps or lacing wire

• Layer
• Typically multi-layered: outer fabric, insulation core, inner lining

• Material
• High-temperature glass fiber fabric with insulation mat (standard), silicone/fiber glass options available

• Max Withstanding Temperature
• Up to 1000C (inner insulation), continuous 550C (surface)

• Product Type
• Insulation Jacket For Engine Exhaust And Engine Manifold

• Size
• Custom fabricated as per engine/manifold geometry

• Surface Treatment
• Anti-fraying stitching, PTFE or silicone coating (optional)

• Tensile Strength
• 1000 N/5cm (outer jacket)

• Thermal Conductivity
• 0.045 W/mK at 200C

• Thickness
• 10-20MM

• Width
• Custom as per exhaust system dimensions

• Application
• Industrial

• Color
• Grey

• Feature
• Non-Flammable, Reduces Ambient Temperatures

• Material
• Fabric

• Product Type
• Insulation Jackets &Amp; Pads

• Size
• Standard

• Surface Treatment
• Polished

• Application
• Industrial

• Coating Type
• Aluminized or silicone resin coating

• Color
• Grey

• Density
• 220 Gram per cubic centimeter(g/cm3)

• Feature
• Removable, reusable, flame resistant, reduces heat loss and surface temperature

• Heat Conductivity
• <0.035 W/mK (at 500C for glass/ceramic wool)

• Installation Guideline
• Velcro, drawstrings, and stainless steel fasteners; tool-free assembly

• Layer
• Multi-layer construction: outer fabric, insulation core, inner mesh

• Material
• High-temperature resistant fiberglass cloth/ceramic wool/stainless steel mesh composite

• Max Withstanding Temperature
• Up to 1000C (outer surface fiberglass/ceramic wool)

• Product Type
• Insulation Jackets Or Insulation Pads For Turbo Chargers

• Size
• Customizable to fit specific turbo charger models

• Surface Treatment
• Silicone or PTFE coated external fabric

• Tensile Strength
• High tensile outer shell, 400-1000 N/50 mm (approx., based on material)

• Thermal Conductivity
• Below 0.045 W/mK at 500C

• Thickness
• 10 Millimeter (mm)

• Width
• Custom-fit as per turbo charger dimensions

• Application
• Industrial

• Coating Type
• Silicone/Aluminized/PTFE coating for protection

• Color
• Grey

• Density
• 128 Gram per cubic centimeter(g/cm3)

• Feature
• Removable, reusable, fire & weather resistant, easy installation and maintenance

• Heat Conductivity
• 0.035 - 0.045 W/mK @ 20C

• Installation Guideline
• Wrap around application with hook & loop, Velcro, D-rings, or draw strings, tool-free installation

• Layer
• Multi-layer: Outer protective layer + insulation core + inner protective layer

• Material
• High-temperature resistant fabric (e.g., silicone coated fiberglass), mineral wool or ceramic fiber insulation

• Max Withstanding Temperature
• Up to 800C depending on insulation material

• Product Type
• Removable And Reusable Insulation Jackets

• Size
• Custom made to client specifications

• Surface Treatment
• Silicone or PTFE coating on external layer

• Tensile Strength
• High tensile fabric for durability

• Thermal Conductivity
• 0.035 - 0.045 W/mK (at ambient temperature)

• Thickness
• 50MM

• Width
• Custom made as per equipment dimensions

• Application
• Industrial

• Breakdown Voltage
• Greater than 30 kV/mm

• Coating Type
• Aluminium Foil/Ceramic/Hybrid

• Color
• Grey

• Density
• 150 Gram per cubic centimeter(g/cm3)

• Feature
• Fireproof, Waterproof, Energy Saving, Flexible, Anti-corrosive, Easy to Install

• Heat Conductivity
• Less than 0.035 W/mK

• Installation Guideline
• Wrap around hot/cold surfaces and secure with ties or velcro; follow manufacturer instructions

• Layer
• Multi-layer (typically 3-7 layers)

• Material
• High Grade Multilayer Composite (Fiberglass/Aluminium Foil/Ceramic/Other Thermal Resistant Layers)

• Max Withstanding Temperature
• Up to 1100C

• Product Type
• Super Multilayer Insulation Pads

• Rated Voltage
• Up to 1000V AC/DC (customizable)

• Size
• Customizable as per requirement

• Surface Treatment
• Aluminium/Reflective Foil coating

• Tensile Strength
• Good (varies based on reinforcing fabric, typically >450 N/50mm)

• Thermal Conductivity
• <0.035 W/mK

• Thickness
• 10 Millimeter (mm)

• Width
• 300 mm - 1200 mm (custom sizes available)

• Application
• Industrial

• Breakdown Voltage
• 10 kV Volt (V)

• Coating Type
• Uncoated

• Color
• Grey

• Density
• 96 Gram per cubic centimeter(g/cm3)

• Feature
• Fire Resistant, Lightweight, Corrosion Resistant

• Heat Conductivity
• 0.032 W/mK Watt/Meter/K (w/(m.k)

• Installation Guideline
• Use mechanical fasteners or adhesives for mounting

• Layer
• Single

• Material
• Fiberglass

• Max Withstanding Temperature
• 750C

• Product Type
• Thermal Insulation Materials

• Rated Voltage
• 1KV Volt (V)

• Size
• 1200 mm x 600 mm

• Surface Treatment
• Plain

• Tensile Strength
• 0.7 MPa Megapascals (MPa )

• Thermal Conductivity
• 0.032 W/mK Watt/Meter/K (w/(m.k)

• Thickness
• 6MM Millimeter (mm)

• Width
• 600 mm Millimeter (mm)