हमें कॉल करें :- 07971670836
भाषा बदलें

  • अधिकतम तापमान का सामना करना
  • -50C to +110C (PUF Insulation limit)
  • अधिष्ठापन दिशानिर्देश
  • Installed over pipes with proper sealing of joints; Fittings for bends and valves to be insulated appropriately
  • ऊष्मा चालकता
  • Standard (refer to thermal conductivity)
  • ऊष्मीय चालकता
  • 0.022 - 0.028 W/mK (PUF)
  • एप्लीकेशन
  • Industrial
  • कोटिंग का प्रकार
  • Aluminum or Stainless Steel Cladding
  • घनत्व
  • ग्राम प्रति घन सेंटीमीटर (g/cm3)
  • चौड़ाई
  • Customized as per requirement
  • टेन्साइल स्ट्रेंथ
  • High (depends on core and jacket specification)
  • प्रॉडक्ट टाइप
  • Bend Jacketed Insulation Pipe
  • फ़ीचर
  • Corrosion resistant, high thermal efficiency, lightweight, weatherproof
  • मटेरियल
  • PUF (Polyurethane Foam) with Aluminum or Stainless Steel Jacket
  • मोटाई
  • मिलीमीटर (mm)
  • लेयर
  • Single or multi-layer (insulation + jacket)
  • सतह का उपचार
  • Polyurethane/Aluminum/SS Jacketing
  • साइज
  • Custom sizes (Diameter and length can be specified)

  • अधिकतम तापमान का सामना करना
  • Up to 350C (rock wool), 140C (glass wool), or as specified
  • अधिष्ठापन दिशानिर्देश
  • Clamp with metal bands, ensure sealed joints for vapor barrier effectiveness
  • ऊष्मा चालकता
  • 0.035-0.041 W/mK
  • ऊष्मीय चालकता
  • 0.035-0.041 W/mK
  • एप्लीकेशन
  • Industrial
  • कोटिंग का प्रकार
  • Aluminum or PVC cladding
  • घनत्व
  • ग्राम प्रति घन सेंटीमीटर (g/cm3)
  • चौड़ाई
  • Customizable, typically 1 meter length per section
  • टेन्साइल स्ट्रेंथ
  • 7.0 kg/cm2 (varies by material)
  • प्रॉडक्ट टाइप
  • Round Insulation Pipe
  • फ़ीचर
  • Moisture resistant, fire retardant, UV resistant, corrosion proof
  • मटेरियल
  • Mild Steel
  • मोटाई
  • 25mm, 40mm, 50mm, or as specified
  • लेयर
  • Single/Double Layered as per requirement
  • सतह का उपचार
  • Aluminium foil or PVC jacketing
  • साइज
  • Dia 25mm to Dia 500mm or customized

  • अधिकतम तापमान का सामना करना
  • -50C to +130C
  • अधिष्ठापन दिशानिर्देश
  • Prefabricated for easy onsite installation; secure with metal bands/clamps
  • ऊष्मा चालकता
  • 0.022~0.035 W/mK
  • ऊष्मीय चालकता
  • 0.022~0.035 W/mK
  • एप्लीकेशन
  • Industrial
  • कोटिंग का प्रकार
  • Aluminum or GI sheet jacketing
  • घनत्व
  • ग्राम प्रति घन सेंटीमीटर (g/cm3)
  • चौड़ाई
  • Custom as per project requirement
  • टेन्साइल स्ट्रेंथ
  • 200-350 kPa (for PU foam)
  • प्रॉडक्ट टाइप
  • Bend Jacketed Insulation Pipe
  • फ़ीचर
  • Highly durable, corrosion resistant, good thermal insulation, moisture resistant
  • मटेरियल
  • Polyurethane Foam/Glass Wool with Aluminum or GI Sheet Jacket
  • मोटाई
  • मिलीमीटर (mm)
  • लेयर
  • 2-layer (insulation + weatherproof jacketing)
  • सतह का उपचार
  • Aluminum/GI cladding for weather protection
  • साइज
  • As per piping diameter and bend radius

  • अधिकतम तापमान का सामना करना
  • Up to 250C
  • अधिष्ठापन दिशानिर्देश
  • Fit over existing pipelines and secure joints using aluminium tape or suitable adhesive
  • ऊष्मा चालकता
  • 0.035 W/mK (at 20C, typical for glass wool)
  • ऊष्मीय चालकता
  • 0.035 W/mK
  • एप्लीकेशन
  • Industrial
  • कोटिंग का प्रकार
  • Aluminium Foil Covering
  • घनत्व
  • ग्राम प्रति घन सेंटीमीटर (g/cm3)
  • चौड़ाई
  • Customizable as per requirement
  • टेन्साइल स्ट्रेंथ
  • Good (Not specifically rated, typical for glass wool pipes)
  • प्रॉडक्ट टाइप
  • Round Insulation Pipe
  • फ़ीचर
  • Thermal insulation, fire resistance, lightweight, easy to install
  • मटेरियल
  • Mild Steel
  • मोटाई
  • 25mm, 40mm, 50mm, 75mm, 100mm (Standard insulation available)
  • लेयर
  • Single or double layer (as per customization)
  • सतह का उपचार
  • Aluminium Foil Faced
  • साइज
  • 2 Inch


Back to top